How To Set Time On Smart Bracelet M4

smart wristband
user's manual

Wear information technology properly

The wristband is best worn after the ulnar styloid Adjust the size of the wrist according to the adjustment hole； Buckle belt buckle。 The sensor should be shut to the skin to avoid moving。

Charge the bracelet

For the first time, make sure that the bombardment is in normal power. If the power is not turned on normally, please connect the charger to accuse the device, and the bracelet will automatically plow on.

Install the bracelet app on your phone

Scan the QR code or go to the App Store, app download and install the app system Requirements： Android 5.0 or to a higher place; iOS9.0 or to a higher place; Support for Bluetooth four.0.

Device connection

For the first use, you lot need to connect to the APP for scale.
After the connectedness is successful, the bracelet will automatically synchronize the time Turn on the Bluetooth switch of the mobile phone system → enter the app device module settings → click "demark device, experience more functions" to enter, information technology will automatically search for the nearby Bluetooth device, find the bracelet device and connect it.

• Afterward the pairing is successful, the APP will automatically save the Bluetooth accost of the bracelet. When the APP is opened or running in the groundwork, information technology will  automatically search and connect the bracelet;
• Android phones apply all notification permissions such as contact information and mobile app settings to run in the background

Bracelet function description

• When the device is turned off, touch and hold the function button for more 3 seconds to turn the device on More bill of fare-long press the shutdown carte du jour to enter the  shutdown interface
• Nether the ability-on state, impact the curt press part fundamental to light upwardly the screen
• When the device is turned on, touch the part key to low-cal the screen;
• Whether the default clock page of the bracelet, y'all tin can enter more menus to set up different clock pages, no operation default v-second screen
• Switch to the middle rate 3-in-i interface to kickoff the examination, centre rate 3-in-one interface 60s timeout automatically off-screen (center rate and blood pressure need bracelet hardware support)
  Clock interface
  After syncing with the phone, the bracelet will automatically calibrate the time.；
  （ tracks Pace）
  Number of steps
  Habiliment the bracelet and record the number of daily motility steps to view the current real-time steps.
  Distance
  The distance of motion is estimated based on the number of walking steps.

Calorie
Judge the calories burned based on the number of walking steps
Eye rate, blood pressure level, blood oxygen three-in-one
After entering the eye rate three-in-one test interface for a few seconds, the current heart rate, blood force per unit area, and blood oxygen exam results are displayed. This feature requires  a wristband to support heart rate and blood pressure sensors
Multi-sport mode
Subsequently all exercise modes are activated, calories consumed and elapsing can be recorded;
Sleep way
When you lot fall asleep, the bracelet will automatically enter the sleep monitoring mode; it will automatically detect the number of deep sleep/low-cal slumber/waking up throughout the dark and summate your slumber quality; the slumber data bracelet will only view the total duration of deep sleep and calorie-free sleep. For details, please View on the APP side.
Note:  Sleep information will only be available when you wear the bracelet when yous fall asleep. Slumber will exist detected from 10 o'clock in the evening. Sleep data for 3/4 hours of falling asleep can be synchronized to the app while you sleep.
music thespian
Successfully continued to the APP, the band can start the music player (play/pause/upward and downwardly song function control)
the conditions
If the APP is successfully connected, the bracelet can obtain the electric current conditions information, and the APP setting-personal information-can set the temperature unit switch (the  conversion between Celsius and Fahrenheit)
Annotation: When connecting to the APP, delight exist sure to plow on the phone location function
Custom scout face
Y'all need to connect to the APP to get the dial settings, y'all can choose the recommended punch/photo album custom dial to synchronize to the bracelet
Temperature measurement
Please wear it for fifteen minutes every time you lot use it to perform temperature measurement, connect the APP to convert the unit, and view the temperature data (the data is non uploaded without APP or Bluetooth disconnection).
Note: The temperature measurement results vary according to the ambient temperature, and the data is for reference but.
Information style
When the bracelet pushes multiple reminder messages, enter this interface to view the latest message record

APP function and settings

（Personal data)

Please set your personal information later inbound the app.
Settings → Personal Information, you tin can set gender – historic period – pinnacle – weight
You lot tin can also prepare your daily goal steps to monitor daily completions
（Application button）
incoming call:
In the connected land, if the telephone call alert function is enabled, when the call comes in, the wristband volition vibrate and display the name or number of the caller. (You demand to requite APP  read address book permission)
SMS notification:
In the continued state, if the SMS reminder function is enabled, the bracelet volition vibrate when in that location is a text message.
Other reminders:
In the connected country, if this role is enabled, when there is a bulletin such as WeChat, QQ, Facebook, etc., the bracelet will vibrate to remind and display the content received by the app. (You need to give the APP permission to go system notifications. The wristband can display twenty-40 words)."
Other functions:：
Plough on vibration to set this function, When there is a phone call, message, or another reminder, the bracelet volition vibrate. If it is airtight, the bracelet will only have a screening reminder without shaking to avoid disturbing.
Tips for Android users:
When using the reminder function, you need to set it to allow "FitPro" to run in the groundwork; it is recommended to add "FitPro" to the rights management and open all permissions.
（Alarm setting）
In the connected state, 8 alarms tin can be set. After setting, it will exist synchronized to the bracelet; an offline alarm is supported. After the synchronization is successful, even if
the APP is not connected, the bracelet volition be reminded co-ordinate to the ready time.
（Looking for a bracelet）
In the connected country, click the "Await for the bracelet" selection and the bracelet will vibrate.
(Remote photography)
In the connected land, the append enters the remote camera interface, shakes the wristband/turns the wrist, and automatically takes a photo after 3 seconds of counting downwards. Please allow the APP to access the album to save the self-portrait photos. (Note: When taking a remote control photograph, the bracelet can not operate other functions, the  app should exit the camera function)
(Sedentary reminder)
Set whether to enable the sedentary reminder function, you lot can set the reminder interval, if you sit for a long time in the set up fourth dimension, the bracelet will remind.
(Raise your hand to burnish)
Turn this office on. When the wristband is in the state of the screen, elevator your wrist and plow the screen to yourself to light up the screen.
(Do not disturb mode)
Turn on the Do Not Disturb mode. You can prepare the Do not disturb fourth dimension menstruation. During the set time period, the bracelet stops receiving notification letters to avoid reminding letters.
(Device reset)
Setting this characteristic reset will erase all data in the bracelet (such as step counting)
(Remove device)
Remove device This feature will erase data and remove the device
Basic parameters

Equipment type	smart wristband	Type of batted	Lithium polymer
Vibration motor	back up	method of synchronization	Bluetooth4.0
Operating temperature	-10°C"fifty°C	sensor	Low power accelerometer
Organisation Requirements	i0S9.0 and above/Android 5.0 and above

Precautions

1. Bathing and pond should not exist worn.
2. Delight Connect the bracelet when synchronizing data.
3. Use the included charging cable to charge.
4. Do non expose the bracelet to high moisture, high temperature, or very depression temperatures for long periods of time
5. The bracelet appears to crash and restart. Please Bank check the phone memory information clear and try again, or exit the APP and reopen it.

Component introduction

*Host *Wrist strap *Charging cable *Packing box and instructions this device complies with office 15 of the FCC Rules. Operation is discipline to the following two weather condition:
(one)  This device may non cause harmful interference, and
(two) this device must take any interference received, including interference that may cause undesired operation.
Any changes or modifications non expressly approved by the political party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to function xv of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. Nevertheless, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or boob tube reception, which can be adamant by turning the equipment off and on, the  user is encouraged to try to correct the interference past one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit unlike from that to which the receiver is connected.
-Consult the dealer or an experienced radio/Television technician for aid.

Documents / Resource

Source: https://manuals.plus/shenzhen-kingsun-enterprises/m4-smart-bracelet-manual

Share this post